Name: CPS171 10 To 115kPa Analog Output Pressure Sensor 50V
Brand: Consensic
Price: 1 USD

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V

Ask Lasest Price

Brand Name :

Consensic

Model Number :

CPS171

Price :

Consult customer service

Payment Terms :

L/C, D/A, D/P, T/T, Western Union, MoneyGram/Alipay/business-to-business

Supply Ability :

1000pcs

Delivery Time :

3-7 work days

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V

Speak with quality and let the strength witness

Years of production experience to escort you, quality manufacturers one-stop procurement

Overview

The CPS171 is a resistive absolute pressure sensor designed specifically for low-pressure applications, such as Manifold Absolute Pressure (MAP) systems. This sensor features a fully calibrated, pressure-compensated analog output and consists of a resistive MEMS pressure sensor combined with a conditioning ASIC for precise pressure measurements.

Key Features and Components

Resistive MEMS Pressure Sensor: Ultra-small form factor for compact applications.
Conditioning ASIC: Ensures accurate pressure measurements within factory-calibrated ranges.
Integrated Sigma-Delta ADC: Provides a high-level analog output signal proportional to the applied pressure.
Internal Calibration Logic: Enhances measurement accuracy and reliability.

Absolute Ratings

These parameters define the maximum stress conditions the sensor can withstand without incurring permanent damage:

Parameter	Symbol	Conditions	Min	Typ	Max	Units
Over Pressure	—	—	—	—	1000 (10)	kPa (bar)
Supply Voltage (with respect to GND)	VDD	—	-0.3	—	6.0	V
Voltages at Analog I/O - In Pin	VINA	—	-0.3	—	VDD+0.3	V
Voltages at Analog I/O - Out Pin	VOUTA	—	-0.3	—	VDD+0.3	V
Storage Temperature	TSTOR	—	-50	—	130	°C

Operating Conditions

Defines the typical conditions for standard operation of the sensor:

Parameter	Symbol	Conditions	Min	Typ	Max	Units
Supply Voltage to GND1	VS	—	4.75	5.0	5.25	V
Operating Temperature Range	—	—	-40	—	85	°C

Pressure Range Characteristics (CPS171-JW001)

Describes the sensor's performance within its calibrated pressure range:

Parameter	Symbol	Conditions	Min	Typ	Max	Units
Pressure Range 1	—	—	10 (100)	—	115 (1150)	kPa (mbar)
Full Scale Output	VFSO	@VS=5.0V	—	4.7	—	V
Full Scale Span	VFSS	@VS=5.0V	—	4.5	—	V
Accuracy	—	(0 to 85°C)	—	—	±1.5	%VFSS
Sensitivity	V/P	—	—	45	—	mV/kPa

Electrical Parameters

Details the sensor's power consumption and electrical output characteristics:

Parameter	Symbol	Conditions	Min	Typ	Max	Units
Supply Current	IDD	Worst Case Settings: 12-bit, 0ms Power Down	1200	—	1500	µA
Analog Output	—	CPS171, Analog_P 10 to 115kPa (100 to 1150mbar)	0.4	—	4.65	V
Analog Output Resolution	RES	—	—	12	—	Bits
Analog Additional Error	Eout	Including Ratiometricity Error, -40 to 125°C	0.1	—	0.5	%
Trimmed System Frequency	fSYS	All Timing in this Specification are Subject to this Variation	—	1.85	—	MHz
Start-Up Time	tSTA	Power-On to Data Ready, Fastest and Slowest Settings	—	4.25	173	ms
Update Rate (Normal Mode)	TRESP_UP	Fastest and Slowest Settings	—	0.70	288	ms
Peak-to-Peak Noise @ Output	NOUT	100 Measurements in 12-bit	—	—	5	LSB

*From:

*To:

Wuxi Consensic Electronic Technology Co., Ltd.

*Subject:

*Message:

Characters Remaining: (0/3000)

Wuxi Consensic Electronic Technology Co., Ltd.

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V

Overview

Key Features and Components

Absolute Ratings

Operating Conditions

Pressure Range Characteristics (CPS171-JW001)

Electrical Parameters

115kPa Analog Output Pressure Sensor

10kPa Analog Output Pressure Sensor

5.0V pressure gauge with analog output

CPS171 10 To 115kPa Analog Output Pressure Sensor 5.0V


*From:	Your email address is incorrect!
*To:	Wuxi Consensic Electronic Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!