Support and Services:
Only trust can not be disappointed
You need a manufacturer to help your business thrive
Professional focus on the source of manufacturers
Stable inventory and fast delivery
Strictly control the details and rest assured of quality
The processing speed is fast and the quality is up to standard
Intimate after-sales without worries
Features:
■High accuracy (1.5% F.S accuracy)
■Linear output and no temperature compensation required
■Long-term stability with minimal zero drift
■Fast response time (20 ms response time)
■The flow rate range is 0-60m/s, and the impact resistance is 100g
■ Solid-state sensing core (no surface voids or fragile membranes)
to resist clogging and pressure shock
■Analog output (1-5 V) (digital RS485 communication output
available)
■Compatible with the measurement of relatively humid gases
■Operating temperature: -25°C to 85°C, Storage temperature: -40°C
to 90°C, Humidity: 0 to 100% RH
■The sensor is resistant to condensation
Technical Parameters:
Functional items | Air, 20°C, 101.325kPa Medical Flow Sensors Stainless Steel Overall
Material 1-5VDCAir, 20°C, 101.325kPa |
| Performance parameters | unit | remark |
| Power supply | 8~24VDC,50mA | VDC | Optional |
| precision | ±1.5 | % | FS |
| Response time | 65 | ms | Optional |
| Maximum pressure | 0.8 | MPa | Customizable |
| Methods of Communication | RS485(MODBUS) | | |
Output mode | Analog outputs 1-5 | VDC | |
| 4-20mA | | Matching |
| temperature | Medium temperature (-10~65) , ambient temperature (-25~85) | ℃ | |
| interface | PT1/4 | | Customizable |
| Calibration method | Air, 20°C, 101.325kPa | | |
| Overall material | stainless steel | | |
Applications:
■Industrial■ Medical■ Petroleum■ Instrumentation■ Gas■ Chemical■
Smelting■ Food Processing■ Mechanical and electrical equipment
Product Description:
CAFS5032 medical flow sensors are made of microelectromechanical
system (MEMS) flow sensing chips, which are suitable for various
purposes of cleaning and relative Dry small flow gas measurement
and process control, unique packaging technology enables theproduct
to meet different range of flow measurement, to ensure high
sensitivity, high reliability,High stability and low cost.It is
based on a MEMS flow sensing unit and a high-precision digital
processing and calibration circuit (MCU). The integrated
delta-sigma/D converter and the logic circuitry and MCU processor
with internal calibration ensure that the sensing signals are
efficiently acquired in real time and that accurate flow signals
are obtained and performed internally The corresponding
compensation algorithm is processed, so there is no need to do any
external calibration compensation to ensure high-precision flow
output; Friendly digital output communication mode,Users can easily
get the corresponding data information for communication; The range
of applications is very wide.
correspondence
1. RS485 communication
The communication mode of the flowmeter is RS485, and there are two
protocol modes: (the factory default is B mode)
A. Factory calibrated communication protocol, which is a
stand-alone communication protocol;
B. Modbus protocol is a multi-machine communication protocol.
The settings are:
Baud rate 9600 (A protocol) / 9600 (B protocol);
Data bits 8;
Stop bit 1;
Checksum/flow control none.
The communication protocol is as follows: Modbus communication
protocol of the upper computer of the CAFS5000 series gas mass flow
meter
2. 4-20mA current signal output
4~20mA Signal Output+(LOOP+, Brown)
Connection of loop resistor (This step is for users who need 4~20mA
current signal output.)
, other users please skip this step).
Relationship between external 4~20mA current output circuit voltage
and maximum resistance of the loop:
RL (max) = 200Ω
